Crystal Video Beamlink Quad Plus | Professional Wireless Transmiss ...

Crystal-Video Beamlink Quad Plus: 4 Channel Video Transmitter, Range 800 m, Ultra Low Latency, IP Streaming, 5GHz Band, SDI HDMI, Full HD 1080P High Definition

The pictures are indicative

BeamLink-Quad Plus 1U Rack is a multi-channel wireless video transmission system based on a 5GHz band that supports 4-channel wireless video and audio transmission, Tally, and pan-tilt-zoom (PTZ) camera control, with video resolution up to 180p/60Hz.
It is widely used in live streaming, TV and filming, multimedi education, etc.

Four channels of transmission only occupy one wireless channel
supports simultaneous four-channel video and audio signals transmission, and each video channel's highest resolution can reach 1080p/60Hz.
These channels use the same wireless channel, greatly saving spectrum resources.

High-quality and low-latency video frame
Supports HD-SDI & 3G-SDI input and output, supports HDMI full HD input and output, highest resolution can reach 1080p/60Hz.
Compared with H.264 technology, H.265 technology offers higher color reproduction, showcasing the image more colorful.

Beamforming
4* 4 MIMO and Beamforming technologies make the wireless beams more concentrated, signal-to-noise ratio higher, which result in a farther transmission distance and a stronger interference immunity.

Operating Frequency: 5.1~5.8 GHz
Antenna Mode: 4*4 MIMO, 5dBi External Antenna
Transmission Power:
- Transmitter: 17dbm (per antenna)
- Receiver: Receiving Sensitivity:<=-70dBm
EVM: <= -28dB
Channel Bandwidth: 40 MHz
Wireless Standard: 802.11n
Network Encryption: WPA2/WPS
Network Mode: Point-to-Point private protocol, RTSP protocol
Transmission Distance: 800 m/2600 ft ( LoS )
Transmission Delay: 70ms
Pairing Function: Supports pairing
HDMI Protocol: Supports HDMI 1.4
Video Resolution: 1080P 23.98/24/25/29.97/30/50/59.94/60, 1080I 50/59.94/60 , 720P 50/59.94/60
Audio Format: AAC
Video Compression Format: H.265
Remote Control: RS232/RS422
IO Port Signal Return: Supports Tally signal return
Interface:
- Transmitter:
SDI input*1, HDMI input*1,
Tally output*1,
Lemo power connector*1,
Antenna connector*4,
Rocker power switch*1,
OLED display screen*1,
Button*3, NP-F970 battery slot*1
-Receiver:
Db9 (Tally input)*1',
Antenna connector*4,
Lemo power connector*1,
Network interface*1,
Power button*1,
Display screen*1,
Functional button*3
Power Consumption:
- Transmitter: 10 W
- Receiver: 20 W
Operating Power Supply:
- Transmitter: DC 12V/2A
- Receiver: DC 12V/3A
Operating Voltage Range:
- Transmitter: 7-17V
- Receiver: 7-36V
Temperature Range: -10 ~ 50°C(Working),-20~80°C(Storage)

4x Trasmettitore
20x Antenna
4x Double Ball Head Magic Arm
4x Cavo SDI
4x Cavo da D-Tap a LEMO 2-pin
1x Ricevitore
1x Adattatore Wi-Fi
5x Cavo RS232
1x Adattatore di alimentazione

Beamlink Quad Plus - Crystal-Video

Accessories for BEAMLINK QUAD PLUS

Others customers also ordered

Best selling