Kit Remus 33/50/65/100mm - S - Blazar
Cine Lenses > Anamorphic
€ 3.524,36 + VAT
€ 4.299,72 VAT Included
Adcom - Blazar
New
Availability: 2 units
KIT Composition
Remus 33mm T1.8 1.5X Full Frame Anamorphic Lens (PL-Mount) - Silver
Available Warranty: 24 months
1 Quantity
Remus 50mm T2.0 1.5x Anamorphic Lens (PL-EF) - Silver
Available Warranty: 24 months
1 Quantity
Remus 65mm T2.0 1.5x Anamorphic Lens (ARRI PL, Silver Flare)
Available Warranty: 24 months
1 Quantity
Remus 100mm T2.0 1.5x Anamorphic Lens (ARRI PL, Silver Flare)
Available Warranty: 24 months
1 Quantity
Remus 1.5x Anamorphic Lens 4-Slot Hard Carrying Case
Available Warranty: 24 months
1 Quantity
Blazar Kit Remus Anamorphic Lenses, 33/50/65/100mm - PL Mount - Silver + Case
*Note: When purchasing Remus, the PL mount will be selected and shipped. For those requiring the EF mount, it must be purchased separately.
*Note
The Remus 33mm has a large protrusion that limits its compatibility with some camera and adapter systems.
Blazar tested the "Mofage POCO PL to E drop-in filter adapter" and the "DZOFILM Octopus PL to E adapter", both of those adapters will work with the Remus 33mm.
Also, here are some general tips when choosing an adapter:
- MOFAGE https://www.adcom.it/en/search/q_n_30?searchstring=&marche=mofage&a=all
- DZO https://www.adcom.it/en/search/q_n_30?searchstring=octopus&marche=dzo&sito=0&but-search=Search
° We recommend adapters with no glass elements in them. So speedboosters, adapters with drop-in filters, or anything similar are not recommended. This is because the glass in the adapter may block the 33mm from mounting. There is one exception to this rule, the "Mofage POCO drop-in filter adapter", which we've tested ourselves and found to be compatible with the 33mm. But otherwise, we recommend not using those types of adapters.
° You'll also have to check some specs to confirm compatibility. On the 33mm Product Page, there are lens diagrams that list the protrusion measurements. The protrusion with PL mount is 25mm and with EF mount it's 17mm. If the lens protrusion is less than the maximum protrusion supported by your camera/adapter, then the Remus 33mm will be compatible.
*Note: When purchasing Remus, the PL mount will be selected and shipped. For those requiring the EF mount, it must be purchased separately.
*Note
The Remus 33mm has a large protrusion that limits its compatibility with some camera and adapter systems.
Blazar tested the "Mofage POCO PL to E drop-in filter adapter" and the "DZOFILM Octopus PL to E adapter", both of those adapters will work with the Remus 33mm.
Also, here are some general tips when choosing an adapter:
- MOFAGE https://www.adcom.it/en/search/q_n_30?searchstring=&marche=mofage&a=all
- DZO https://www.adcom.it/en/search/q_n_30?searchstring=octopus&marche=dzo&sito=0&but-search=Search
° We recommend adapters with no glass elements in them. So speedboosters, adapters with drop-in filters, or anything similar are not recommended. This is because the glass in the adapter may block the 33mm from mounting. There is one exception to this rule, the "Mofage POCO drop-in filter adapter", which we've tested ourselves and found to be compatible with the 33mm. But otherwise, we recommend not using those types of adapters.
° You'll also have to check some specs to confirm compatibility. On the 33mm Product Page, there are lens diagrams that list the protrusion measurements. The protrusion with PL mount is 25mm and with EF mount it's 17mm. If the lens protrusion is less than the maximum protrusion supported by your camera/adapter, then the Remus 33mm will be compatible.
