Blink 500 B3 - Saramonic
Microphones Wireless > Portable with Dual Receiver
€ 135,00 + VAT
€ 164,70 VAT Included
Wire Transfer / Credit Card
Adcom - Saramonic
Used&Demo
Availability (1 pz)
Product Detail Ex Demo
Type | Ex Demo | Functionality | |
Aesthetics | Instructions | Yes | |
Original packaging | Yes |
Article Description
Saramonic Digital Wireless Omni Lavalier Microphone System for Lightning iOS Devices (2.4 GHz)
Simplify and expedite your entry into wireless audio with the Saramonic Blink 500 B3, an ultracompact and extraordinarily easy-to-use true wireless microphone system offering a cost-effective, all-inclusive solution for recording one subject to an iPhone or iPad equipped with a Lightning port.
The Blink 500 B3 delivers considerably improved sound quality compared to the built-in mics on cameras and mobile devices while functioning as an ultracompact digital system that provides immediate out-of-the-box operability for anyone, making it ideal for video, podcast, and mobile journalism applications.
Once it's plugged in and powered on, it's set and ready so your focus can stay on your content.
Equally straightforward and small, the Blink 500 B3 gives you everything necessary for recording crisp, clear speech in any location.
You get a clip-on transmitter with a built-in microphone and a clip-on omni lavalier mic, a dual-channel receiver that plugs directly into your device, and the requisite charging cable for the transmitter.
Whether you're a run-and-gun videographer, a YouTube content creator, or an avid vlogger, the Blink 500 B3 can get your wireless audio going in no time.
° Unpacking the Blink 500 B3
- Use the ultracompact clip-on transmitter as a true wireless microphone with its built-in mic element, or as a bodypack transmitter with its supplied clip-on lavalier microphone.
- The ultracompact dual-channel receiver plugs directly into your iOS device's Lightning port, letting it work seamlessly with your iPhone or iPad-no batteries, cables, or clips required.
- Simply plug in the receiver and power on the transmitter to access reliable wireless audio functionality in an instant.
° Perfect for 1- or 2-Person Shoots
- Since the Blink 500 RXDi is a dual-channel receiver, it can simultaneously handle two Blink 500 TX wireless transmitters (second tran
Simplify and expedite your entry into wireless audio with the Saramonic Blink 500 B3, an ultracompact and extraordinarily easy-to-use true wireless microphone system offering a cost-effective, all-inclusive solution for recording one subject to an iPhone or iPad equipped with a Lightning port.
The Blink 500 B3 delivers considerably improved sound quality compared to the built-in mics on cameras and mobile devices while functioning as an ultracompact digital system that provides immediate out-of-the-box operability for anyone, making it ideal for video, podcast, and mobile journalism applications.
Once it's plugged in and powered on, it's set and ready so your focus can stay on your content.
Equally straightforward and small, the Blink 500 B3 gives you everything necessary for recording crisp, clear speech in any location.
You get a clip-on transmitter with a built-in microphone and a clip-on omni lavalier mic, a dual-channel receiver that plugs directly into your device, and the requisite charging cable for the transmitter.
Whether you're a run-and-gun videographer, a YouTube content creator, or an avid vlogger, the Blink 500 B3 can get your wireless audio going in no time.
° Unpacking the Blink 500 B3
- Use the ultracompact clip-on transmitter as a true wireless microphone with its built-in mic element, or as a bodypack transmitter with its supplied clip-on lavalier microphone.
- The ultracompact dual-channel receiver plugs directly into your iOS device's Lightning port, letting it work seamlessly with your iPhone or iPad-no batteries, cables, or clips required.
- Simply plug in the receiver and power on the transmitter to access reliable wireless audio functionality in an instant.
° Perfect for 1- or 2-Person Shoots
- Since the Blink 500 RXDi is a dual-channel receiver, it can simultaneously handle two Blink 500 TX wireless transmitters (second tran
System
Wireless Technology: Digital 2.4 GHz
Number of RF Channel Frequencies: 18
Included Transmitters: 1 x Clip-On with Microphone
Diversity: Non-Diversity
RF Frequency Band: 2400 to 2483.5 MHz
RF Bandwidth: Up to 83.5 MHz
RF Channel Scanning: Auto-Scan
Max Operating Range:
- 164' / 50 m (Line of Sight)
- 98.4' / 30 m (with Obstruction)
Max Transmitters per Band: 18
Built-In Recorder: No
Timecode Support: No
Mobile App Compatible:
No
*As of January, 2023: Check with manufacturer for the most up-to-date compatibility
Sample Rate/Resolution: 48 kHz / 24-Bit
Latency: 12 ms
Encryption: No
Modulation: GFSK
SNR: greater than or equal 70 dB
THD: less than or equal 0.1 %
Receiver
Receiver Type: Plug-In
Mounting Options: Plug-In (with Included Hardware)
Antenna: 1 x 1/4 Wave Wire, Fixed
Number of Audio Channels: 2
Audio I/O: No
Audio Output Level: 5 dB
Frequency Response: 20 Hz to 16 kHz
Network I/O: No
Word Clock I/O: No
USB/Lightning Connectivity: 1 x Lightning Male (Audio, Bus Power)
Power Requirements: Bus Power (Lightning)
Display & Indicators: 1 x LED (Power, Sync)
Housing: ABS, Plastic
Operating Temperature: 32 to 122°F / 0 to 50°C
Storage Temperature: -4 to 122°F / -20 to 50°C
Dimensions: 3 x 0.7 x 0.4" / 7.6 x 1.7 x 1.1 cm
Weight: 0.4 oz / 10 g
Transmitter
Transmitter Type: Clip-On with Microphone
RF Output Power: 10 mW
Audio I/O: 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input
Included Cable Connector: 1/8" / 3.5 mm TRS
Plug-In Power: 1 V
Pad: No
Muting: No
Audio Input Level: -42 to -30 dBV (at 0 dB Gain)
Auto-Level Control: No
Gain Range: +11 to +25 dB (7 dB Steps)
Signal Processing: No
Frequency Response: 20 Hz to 16 kHz
Sync Method: IR
Antenna: 1 x 1/4 Wave Wire, Fixed
Power Requirements: Battery or Bus Power (USB)
Battery Type: 1 x Built-In Rechargeable (Included, Not Replaceable)
Internal Battery Capacity: 400 mAh
Battery Charging Time: 1.5 to 2.5 Hours
Approx. Battery Life: 5 Hours
USB/Lightning I/O:. 1 x USB-C (Bus Power, Charging)
Display & Indicators:
- 4 x LED (Audio Level, Power)
- 1 x LED (Battery Status)
- 1 x LED (Recharging)
Housing: ABS, Plastic
Operating Temperature: 32 to 122°F / 0 to 50°C
Storage Temperature: -4 to 122°F / -20 to 50°C
Dimensions: 2.5 x 1.7 x 0.7" / 6.3 x 4.3 x 1.7 cm
Weight: 1.2 oz / 34 g
Microphone
Microphone Type: Lavalier
Color: Black
Sound Field: Mono
Operating Principle: Pressure Operated
Capsule: Electret Condenser
Polar Pattern: Omnidirectional
Frequency Range: 50 Hz to 18 kHz
Equivalent Noise Level: 58 dB
Maximum SPL: 110 dB SPL
Sensitivity: -30 dB
Output Connector: 1 x 1/8" / 3.5 mm TRS Male Unbalanced
Cable Length: 4' / 1.22 m
Operating Voltage: 1 V
Wireless Technology: Digital 2.4 GHz
Number of RF Channel Frequencies: 18
Included Transmitters: 1 x Clip-On with Microphone
Diversity: Non-Diversity
RF Frequency Band: 2400 to 2483.5 MHz
RF Bandwidth: Up to 83.5 MHz
RF Channel Scanning: Auto-Scan
Max Operating Range:
- 164' / 50 m (Line of Sight)
- 98.4' / 30 m (with Obstruction)
Max Transmitters per Band: 18
Built-In Recorder: No
Timecode Support: No
Mobile App Compatible:
No
*As of January, 2023: Check with manufacturer for the most up-to-date compatibility
Sample Rate/Resolution: 48 kHz / 24-Bit
Latency: 12 ms
Encryption: No
Modulation: GFSK
SNR: greater than or equal 70 dB
THD: less than or equal 0.1 %
Receiver
Receiver Type: Plug-In
Mounting Options: Plug-In (with Included Hardware)
Antenna: 1 x 1/4 Wave Wire, Fixed
Number of Audio Channels: 2
Audio I/O: No
Audio Output Level: 5 dB
Frequency Response: 20 Hz to 16 kHz
Network I/O: No
Word Clock I/O: No
USB/Lightning Connectivity: 1 x Lightning Male (Audio, Bus Power)
Power Requirements: Bus Power (Lightning)
Display & Indicators: 1 x LED (Power, Sync)
Housing: ABS, Plastic
Operating Temperature: 32 to 122°F / 0 to 50°C
Storage Temperature: -4 to 122°F / -20 to 50°C
Dimensions: 3 x 0.7 x 0.4" / 7.6 x 1.7 x 1.1 cm
Weight: 0.4 oz / 10 g
Transmitter
Transmitter Type: Clip-On with Microphone
RF Output Power: 10 mW
Audio I/O: 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input
Included Cable Connector: 1/8" / 3.5 mm TRS
Plug-In Power: 1 V
Pad: No
Muting: No
Audio Input Level: -42 to -30 dBV (at 0 dB Gain)
Auto-Level Control: No
Gain Range: +11 to +25 dB (7 dB Steps)
Signal Processing: No
Frequency Response: 20 Hz to 16 kHz
Sync Method: IR
Antenna: 1 x 1/4 Wave Wire, Fixed
Power Requirements: Battery or Bus Power (USB)
Battery Type: 1 x Built-In Rechargeable (Included, Not Replaceable)
Internal Battery Capacity: 400 mAh
Battery Charging Time: 1.5 to 2.5 Hours
Approx. Battery Life: 5 Hours
USB/Lightning I/O:. 1 x USB-C (Bus Power, Charging)
Display & Indicators:
- 4 x LED (Audio Level, Power)
- 1 x LED (Battery Status)
- 1 x LED (Recharging)
Housing: ABS, Plastic
Operating Temperature: 32 to 122°F / 0 to 50°C
Storage Temperature: -4 to 122°F / -20 to 50°C
Dimensions: 2.5 x 1.7 x 0.7" / 6.3 x 4.3 x 1.7 cm
Weight: 1.2 oz / 34 g
Microphone
Microphone Type: Lavalier
Color: Black
Sound Field: Mono
Operating Principle: Pressure Operated
Capsule: Electret Condenser
Polar Pattern: Omnidirectional
Frequency Range: 50 Hz to 18 kHz
Equivalent Noise Level: 58 dB
Maximum SPL: 110 dB SPL
Sensitivity: -30 dB
Output Connector: 1 x 1/8" / 3.5 mm TRS Male Unbalanced
Cable Length: 4' / 1.22 m
Operating Voltage: 1 V