Audiotechnica AT 2035 | da Studio | Microfoni a filo

Microfono condensatore, polarizzato con diaframma a massa ridotta, cardioide.
Risposta in Frequenza 20-20,000 Hz - Sensibilità a circuito aperto - 33 dB (22,4 mV) rif. 1V @ 1 Pa
Impedenza 120 ohm - Pressione sonora max. applicabile 148 dB SPL, 1 kHz @ 1% T.H.D., 158 dB SPL
con attenuatore 10 dB
Basse frequenze Roll Off 80 Hz 1 dB/ottava - Gamma dinamica (tipica) 136 dB, 1 kHz @ SPL massimo
Rapporto segnale/rumore 82 dB, 1 kHz @ 1 Pa* - Alimentazione Phantom 11-52V DC (±4V), 3 mA
tipico
Peso 403 g - Dimensioni 170 mm lunghezza, 52 mm diametro (massimo) - Connettore XLR3M integrato
Accessori Inclusi: supporto anti-shock AT8458, adattatore filettato da 5/8"-27 a 3/8"-16, custodia morbida

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -33 dB (22.4 mV) re 1V at 1 Pa
IMPEDANCE 120 ohms
MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.,
158 dB SPL, with 10 dB pad (nominal)
NOISE 12 dB SPL
DYNAMIC RANGE (typical) 136 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 82 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 3.8 mA typical
SWITCHES Flat, roll-off,
10 dB pad (nominal)
WEIGHT 403 g (14.2 oz)
DIMENSIONS 170.0 mm (6.69") long,
52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8458 shock mount for 5/8"-27 threaded stands, 5/8"-27 to 3/8"-16 threaded adapter, soft protective pouch
AUDIO-TECHNICA CASE STYLE R5

AT-2035 - AudiotechnicaEAN 4961310101756

Accessori per AT-2035

Altri clienti hanno ordinato anche

I più venduti